Error code 45 It is a fairly common Device Manager issue that many Windows users have encountered. This error occurs when Windows fails to recognize the device connected to the system, and the following message appears on your screen:
This device is not connected to the computer code 45
This error occurs if the device that was previously connected to the computer is no longer connected. To solve this problem, reconnect this device to your computer. No decision necessary. This error code is only used to indicate a disconnected state of the device and does not require you to resolve it. Microsoft states that the error code is resolved automatically when the paired device is connected to the computer.
But sometimes, this device manager error code can continue to torture you. Your system may crash when trying to use the device for which this error previously occurred. Also, Windows may run slowly or disconnect frequently.
This error occurs if the device that was previously connected to the computer is no longer connected. To solve this problem, reconnect this device to your computer. No decision necessary. This error code is only used to indicate a disconnected state of the device and does not require you to resolve it. The error code is automatically resolved when the associated device is connected to the computer.
Error code 45 can appear at any time, but knowing when and where it happened is very helpful in trying to fix the problem. This error can be attributed to several reasons. You may have misconfigured or damaged device drivers or you are dealing with faulty hardware. In addition to that, the error can also occur due to corruption or glitch in the Windows registry, which is most likely due to some recent changes that have been made.
Sometimes fixing this problem is as simple and simple as unplugging the devices and connecting them to the computer. If you are experiencing this problem due to a faulty hardware, it is recommended that you contact a technician and have it repaired or replaced. You will learn more if none of the solutions presented below were able to help you fix the problem.
1]Run the hardware troubleshooter
1]To run the hardware troubleshooter, click to start Then click on the gear icon that opens Settings page. While you’re at it, type Repair and press Enters.
2]A Troubleshooting window will appear. Click on Hardware and sound option there.
3]Select materials and devices. Another window will appear. click next one There to start the troubleshooter.
2]Scan and repair damaged hard drive
1]In the search box, type Order Then press CTRL + Shift + Enter. Write “chkdsk /f” in the CMD box and press ENTER.
The disk check will start looking for possible damage to your hard drive which could be the cause of error code 45. If it is found, it will fix it.
3]Update, rollback or reinstall the driver
You may want to check if your device drivers are up to date. This article will show you how to update or reinstall device drivers.
We hope that one of the above three solutions was able to help resolve the error. If not, then it is safe to assume that the problem is with the hardware. If you have made sure that all the physical connections are made correctly, it could mean that the hardware is faulty and you may need to replace it. As mentioned earlier, in such a case, the system may need to be checked by a hardware technician.
Read: A Microsoft hosted network virtual adapter is missing.
